Tap in on a serial data stream and transparently feed another monitor, printer or other device.

Model 9PCDT allows an RS-232 port to tap into and check data being transmitted between two other RS-232 ports. DIP switches set programming to monitor the main Transmit and Receive lines individually or together. Choose between monitoring the DCE or DTE port. Also allows the monitoring port to be either DTE or DCE. The DTE connector is male, and DCE and TAP connectors are female.

Model BB-9PMDS connects two computers or terminals to one modem without switching. The RS-232 splitter can combine two 9-pin DTE ports to one 9-pin DCE port. Gain reliability by capturing data from one peripheral on redundant PCs and improve system economy by sharing multiple PCs on a

Model 232UDS, universal serial data splitter, can be connected so that any two RS-232 devices can connect to any one RS-232 device. For example, two computers can share the same modem or serial printer at the same time and each can remain connected at all times. The other pins must be programmed for proper direction of data flow.

Model 232UDS can function as either an modem data splitter or a printer data splitter. It allows you to switch select which lines are OR’d together and which lines are passed straight through. This unit is self-powered from the RS-232 line and can be left permanently installed.

Tap in on a serial data stream and transparently feed another monitor, printer or other device.
Model 232CDT has DIP switches that allow you to monitor the main Transmit and Receive lines individually or together. The male RS-232 connector on the top and the female RS-232 connector on the bottom are connected straight through, pin for pin. These connectors are used to connect the device – in series – with the RS-232 line to be tapped.

Model BB-232MSS2, RS-232 4-Port Mini-Smart Switch/Port Combiner, allows one RS-232 host device to connect to up to four RS-232 devices. Model BB-232MSS2 can function as a software and/or hardware controlled switch.